Why I Chose Mak Energy for My GSHP Borehole System

When I started looking into renewable heating options for my home, I came across the GSHP borehole system (Ground Source Heat Pump). At first, the technology seemed complicated — drilling boreholes, installing underground loops, and connecting everything to a heat pump system. I wasn’t sure if it would be the right fit for my property. But after careful research and comparing providers, I chose Mak Energy, and I can confidently say it was the best decision for me.

Why I Wanted a GSHP Borehole System

My home had high heating costs, especially during the winter months. I wanted something that was:

• Cost-effective in the long run
  
  
• Environmentally friendly
  
  
• Reliable and low-maintenance
  
  
• Able to provide both heating and hot water
  
  

The GSHP borehole system checked all these boxes. It uses heat from deep underground and transfers it into my home using a ground source heat pump. With boreholes, I didn’t need a huge amount of land for trenches, making it perfect for my property size.

Why I Chose Mak Energy

There are plenty of renewable energy installers in the UK, but I chose Mak Energy for several reasons:

1. Expertise in Borehole Systems – They have a proven track record in installing GSHPs, including borehole setups, which are more complex than standard trench systems.
   
   
2. Clear Guidance – Their team explained the process in simple terms, from drilling to installation, so I felt confident in my choice.
   
   
3. End-to-End Service – They handled the design, drilling, installation, and even aftercare.
   
   
4. Accredited & Reliable – Mak Energy is an MCS-certified installer, which gave me peace of mind about the quality of their work.
   
   

The Installation Process

The installation was carried out smoothly and professionally. Here’s how it went:

1. Site Survey – Mak Energy’s engineers visited my property to check if it was suitable for boreholes. They measured available space and assessed ground conditions.
   
   
2. System Design – Based on my home’s energy demand, they designed a system with the right number of boreholes and an appropriately sized heat pump.
   
   
3. Drilling the Boreholes – This was the most technical part. Specialist drillers created deep boreholes to access stable ground temperatures.
   
   
4. Pipework Installation – Ground loops were inserted into the boreholes and filled with antifreeze solution to capture underground heat.
   
   
5. Heat Pump Setup – Finally, the pump was installed inside my home and connected to my heating and hot water system.
   
   

How It Works

The GSHP borehole system works by:

• Extracting heat stored underground (a constant temperature year-round)
  
  
• Circulating it through ground loops in the boreholes
  
  
• Using the heat pump to upgrade this energy for use in radiators, underfloor heating, and hot water
  
  

It’s an efficient, renewable system that can cut heating bills significantly.

The Benefits I’ve Seen

Since Mak Energy installed my borehole GSHP, I’ve noticed major benefits:

• Lower Heating Bills – My energy costs have reduced, and I’m less reliant on traditional gas.
  
  
• Year-Round Efficiency – Unlike air source heat pumps that can lose efficiency in extreme cold, the borehole GSHP provides consistent performance.
  
  
• Eco-Friendly Heating – I feel good knowing my home is powered by renewable energy.
  
  
• Quiet & Low Maintenance – The system runs quietly and requires minimal upkeep.
  
  
• Property Value Increase – Installing renewable technology has made my home more future-proof.
  
  

Challenges to Consider

While I’m happy with the system, there are a couple of things worth noting:

• Upfront Costs – Borehole systems are more expensive than trench-based GSHPs, mainly because of drilling. However, Mak Energy helped me explore financing options and government incentives.
  
  
• Installation Time – The drilling process took a few days, but the results were worth the wait.
  
  

Final Thoughts

Choosing Mak Energy for my GSHP borehole system was one of the smartest home improvement decisions I’ve made. They guided me every step of the way, ensuring the system was tailored to my home’s needs. Now, I enjoy reliable heating, lower bills, and the peace of mind that comes from using a sustainable energy source.

If you’re considering a GSHP borehole system in the UK, I’d strongly recommend Mak Energy. Their professionalism, expertise, and customer support make the entire process smooth and stress-free.

???? Do you want me to expand this into an 800–1000 word version with FAQs at the end, like your